4AG 4VALVE
HIGH POWER PROFILE CAMSHAFT
A common cam is used for both the IN and EX (Lift10mm~)
A common cam is used for both the IN and EX 14111-4AG-…… x2
4AG 4V CAMSHAFT (Standard lifter)
| Part No. |
Cam Angle |
Cam Lift |
|
| 14111-4AG-001 |
256 |
7.9 |
|
| 14111-4AG-011 |
264 |
7.9 |
|
| 14111-4AG-021 |
272 |
7.9 |
|
| 14111-4AG-031 |
288 |
7.9 |
|
| 14111-4AG-032 |
288 |
8.5 |
|
| 14111-4AG-041 |
304 |
7.9 |
|
| 14111-4AG-042 |
304 |
8.5 |
|
A common cam is used for both the IN and EX |
4AG 4V CAMSHAFT (Inner shim kit required)
| Part No. |
Cam Angle |
Cam Lift |
|
| 14111-4AG-I01 |
256 |
9.0 |
|
| 14111-4AG-I11 |
264 |
9.0 |
|
| 14111-4AG-I12 |
264 |
10.3 |
|
| 14111-4AG-I21 |
272 |
9.0 |
|
| 14111-4AG-I22 |
272 |
10.3 |
|
| 14111-4AG-I31 |
288 |
10.3 |
|
| 14111-4AG-I41 |
280 |
9.0 |
|
| 14111-4AG-I42 |
288 |
10.0 |
|
| 14111-4AG-I43 |
288 |
10.5 |
|
| 14111-4AG-I51 |
304 |
9.0 |
|
| 14111-4AG-I52 |
304 |
10.5 |
|
| 14111-4AG-I61 |
310 |
10.5 |
|
| 14111-4AG-I71 |
320 |
10.8 |
|
A common cam is used for both the IN and EX |
4AG 4VALVE INTAKE ONLY
HIGH POWER PROFILE CAMSHAFT
INTAKE ONLY (Lift10mm~)
.jpg)
| INTAKE ONLY 14111-4A0-…… x1 |
4AG 4V CAMSHAFT (Standard lifter)
| Part No. |
Cam Angle |
Cam Lift |
|
| 14111-4A0-001 |
256 |
7.9 |
|
| 14111-4A0-011 |
264 |
7.9 |
|
| 14111-4A0-021 |
272 |
7.9 |
|
| 14111-4A0-031 |
288 |
7.9 |
|
| 14111-4A0-032 |
288 |
8.5 |
|
| 14111-4A0-041 |
304 |
7.9 |
|
| 14111-4A0-042 |
304 |
8.5 |
|
Without distributer drive gear |
4AG 4V CAMSHAFT (Inner shim kit required)
| Part No. |
Cam Angle |
Cam Lift |
|
| 14111-4A0-I01 |
256 |
9.0 |
|
| 14111-4A0-I11 |
264 |
9.0 |
|
| 14111-4A0-I12 |
264 |
10.3 |
|
| 14111-4A0-I21 |
272 |
9.0 |
|
| 14111-4A0-I22 |
272 |
10.3 |
|
| 14111-4A0-I31 |
280 |
10.3 |
|
| 14111-4A0-I41 |
288 |
9.0 |
|
| 14111-4A0-I42 |
288 |
10.0 |
|
| 14111-4A0-I43 |
288 |
10.5 |
|
| 14111-4A0-I51 |
304 |
9.0 |
|
| 14111-4A0-I52 |
304 |
10.5 |
|
| 14111-4A0-I61 |
310 |
10.5 |
|
| 14111-4A0-I71 |
320 |
10.8 |
|
Without distributer drive gear |
|
4AG 4VALVE
UP RATED VALVE SPRINGS
14750-4AG-000
Our up rated valve springs are required to help you get the most from your cam enabling the cam and your engine to operate to the max.
4AG 4VALVE
INNER-SHIM KIT
14730-4AG-000
Replacing the original outer shim design with an inner shim type helps to reduce friction and improve security.
* Shims sold separately (1.5~3.0mm)
**The kit contains standardised size shims, but on occasion other size shims will be required to create the required gap,these are sold separately.
4AG 4VALVE
ADJUSTABLE CAM PULLEYS |
| In all sections duralumin A-7075 is used. |
| A common cam is used for both the IN and EX 14211-4AG-001 |
| •With a vernier degree scale |
4AG 5VALVE
HIGH POWER PROFILE CAMSHAFT
IN 14111-101-……x1(left)
EX 14121-101-……x1(right) |
4AG 5V INTAKE CAMSHAFT(VVT type)
| Part No |
Cam Angle |
Cam Lift |
|
| #14111-101-001 |
256 |
8.5 |
|
| #14111-101-002 |
256 |
9.0 |
|
| #14111-101-011 |
264 |
8.5 |
|
| #14111-101-012 |
264 |
9.0 |
|
| 14111-101-021 |
272 |
8.5 |
|
| 14111-101-022 |
272 |
9.0 |
|
| 14111-101-031 |
288 |
8.5 |
|
| 14111-101-032 |
288 |
9.0 |
|
| 14111-101-041 |
304 |
8.5 |
|
| 14111-101-042 |
304 |
9.0 |
|
#AE101 STD ECU idling is not affected.
• When installing the cam, check that that there is enough piston to valve clearance for the full operating range of the VVT system.
• Dwellpin phase angle same as STD AE101.Cam center angle be based on AE101(125°). |
4AG 5V EXHAUST CAMSHAFT
| Part No |
Cam Angle |
Cam Lift |
|
| #14121-101-001 |
256 |
8.5 |
|
| #14121-101-002 |
256 |
9.0 |
|
| 14121-101-011 |
264 |
8.5 |
|
| 14121-101-012 |
264 |
9.0 |
|
| 14121-101-021 |
272 |
8.5 |
|
| 14121-101-022 |
272 |
9.0 |
|
| 14121-101-031 |
288 |
8.5 |
|
| 14121-101-032 |
288 |
9.0 |
|
| 14121-101-041 |
304 |
8.5 |
|
| 14121-101-042 |
304 |
9.0 |
|
#AE101 STD ECU idling is not affected.
• Other Cam profiles are available for the AE101 and AE111, please contact us. |
|
|
4AG (5VALVE AE101 & AE111)
UP RATED VALVE SPRINGS
|
14750-101-000 (Designed ofr the AE101 only)
14750-111-000 (Designed for the AE111 only)
Our up rated valve springs are required to help you get the most from your cam enabling the cam and your engine to operate to the max.
|
|
4AG (5VALVE AE101 & AE111)
ADJUSTABLE CAM PULLEYS |
In all sections duralumin A-7075 is used.
|
IN 14210-101-001x1(left) (Designed for AE101 Only)
EX 14211-4AG-001x1(right) (Designed for AE101 Only)
IN 14210-111-001x1(left) (Designed for AE111 Only)
EX 14211-111-001x1(right) (Designed for AE111 Only)
• With a vernier degree scale
# VVT system cannot be used.